click to zoom
more details
spec sheet manual Model MLE300SALE
Diplex Filter Spec
This is the first 1GHz drop-in upgrade/ replacement module for the 450/550/750 MHz line extender. With our design you get maximum gain and the lowest noise possible. In many cases no spacing changes need to be made. Built in reverse, plug n play diplex filters and the ability to use your existing reverse equalizers and pads make this your best choice. Available now!
click to zoom
more details
spec sheet High Gain (Power Doubled)
Trunk & Bridger Amplifier 5-40/54-750 MHz
Model MLE300SASYSI-4**25
Diplex Filter Spec
A 750 MHz amplifier with more gain and lower noise than typical 550 MHz amplifiers. Plug-in diplex filters making changes to the reverse bandwidth inexpensive and quick. Drop this in your existing housing and away you go. It even accepts all your pads, reverse equalizers, AGC and accessories. Take your existing 550 MHz System I amplifiers and system to a new level.
click to zoom
Model MLE300SAT-4**.25 - High Gain Dual -
more details
spec sheet
manual Model MLE300LGDNA - Low Gain Node Amp - spec sheet
A full 1 GHz amplifier with more gain and lower noise than typical 750 and 862 MHz amplifiers. Plug-in diplex filters making changes to the reverse bandwidth inexpensive and quick. Drop this in your existing housing and away you go. It even accepts all your pads, reverse equalizers, AGC and accessories. Take your existing 550/750/862 MHz System II amplifiers and system to a new level. System II upgrades available now. System III upgrades will be available soon.
Model MLE-300SA-FIBER
(For use with Systemax MLE300SAT) - spec sheet
Systemax II Optical Node Station - spec sheet
The Systemax S-series series Model MLE-300SA-FIBER Optical Node Receiver is typically used with the MLE300SAT-XXX.XX High Gain Dual Broadband Amplifier. Together they provide a 1 Ghz operational Node configuration.
One or two Model MLE-300SA-FIBER Optical Node receiver is designed to plug in directly, re-using the existing power supply, the original amplifier chassis, and the original housing lid and wiring. The Model Model MLE-300SA-FIBER Optical Node Receiver includes a new design pc board that is installed in the original chassis and fully tested as new. It is a drop in replacement for the 6920 SA series optical node and plugs into the MLE300SAT (version modified with suitable coaxial connectors replacing the input diplex filter to accept the input RF cable).
click to zoom
*MLE1000 1.0GHz 0 thru 21 dB in 1 dB increments
*Triple Spec - use MLE1000 1.0 GHz EQ for 750/862 MHz
7-REF 33 MHz from 1 thru 8 in 1 dB increments
7-REF 42 MHz from 1 thru 9 in 1 dB increments
7-REF 55 MHz from 1 thru 10 in 1 dB increments
7-REF 65 MHz from 1 thru 9 in 1 dB increments